「翔博精选指标」精准线主图（通达信公式主图源码测试图）

「翔博精选指标」精准线主图（通达信公式主图源码测试图）免费资源

2021-10-23 来源：原创编辑：翔博软件

{精准线主图} {参数顶底开关010点位差010指定点010000} V2V:=V/REF(V,1)=1.9ANDCREF(C,1); ZT:=C/REF(C,1)1.097; {涨停红色} ZDF:=(C-REF(C,1))/REF(C,1)*100; STICKLINE(ZDF9.

{精准线主图}
{参数顶底开关 0 1 0 点位差0 1 0 指定点 0 1000 0}
V2V:=V/REF(V,1)>=1.9 AND C>REF(C,1);
ZT:=C/REF(C,1)>1.097;
{涨停红色}
ZDF:=(C-REF(C,1))/REF(C,1)*100;
STICKLINE(ZDF>9.5,C,O,3.1,0),COLOR0000CC;
STICKLINE(ZDF>9.5,C,O,2.1,0),COLOR0000DD;
STICKLINE(ZDF>9.5,C,O,1.2,0),COLOR0000EE;
STICKLINE(ZDF>9.5,C,O,0.2,0),COLOR0000FF;
STICKLINE(ZDF>9.5,H,L,0,0),COLOR0000FF;
L0:=点位差/100;
前极点精准线:IF(顶底开关=0,CONST(REF(L,指定点)),CONST(REF(H,指定点))),COLORMAGENTA;
DRAWICON(ABS(L-前极点精准线)<=L0,前极点精准线,38);
DRAWICON(ABS(H-前极点精准线)<=L0,前极点精准线,39);
DRAWICON(ABS(O-前极点精准线)<=L0,前极点精准线,40);
DRAWICON(ABS(C-前极点精准线)<=L0,前极点精准线,37);
{DRAWTEXT(ABS(L-前极点精准线)<=L0 ,L*0.98,'最低价精准'),COLORRED;
DRAWTEXT(ABS(H-前极点精准线)<=L0 ,H*0.98,'最高价精准'),COLORRED;
DRAWTEXT(ABS(O-前极点精准线)<=L0 ,O*0.98,'开盘价精准'),COLORRED;
DRAWTEXT(ABS(C-前极点精准线)<=L0 ,C*0.98,'收盘价精准'),COLORRED;}
WWWzbsirCOM:=VOL/((HIGH-LOW)*2-ABS(CLOSE-OPEN));
STICKLINE(前极点精准线=L AND 前极点精准线=O ,H,L,0,0),COLORWHITE;
{前极点精准线1:IF(顶底开关=0,CONST(REF(C,指定点)),CONST(REF(H,指定点))),COLOR178448;
DRAWICON(ABS(L-前极点精准线1)<=L0,前极点精准线1*0.99,38);
DRAWICON(ABS(H-前极点精准线1)<=L0,前极点精准线1*1.01,39);};
{前极点精准线2:IF(顶底开关=0,CONST(REF(O,指定点)),CONST(REF(H,指定点))),COLOR178448;
DRAWICON(ABS(L-前极点精准线2)<=L0,前极点精准线2*0.99,38);
DRAWICON(ABS(H-前极点精准线2)<=L0,前极点精准线2*1.01,39);};

{前极点精准线3:IF(顶底开关=0,CONST(REF(H,指定点)),CONST(REF(H,指定点))),COLOR178448;
DRAWICON(ABS(L-前极点精准线3)<=L0,前极点精准线3*0.99,38);
DRAWICON(ABS(H-前极点精准线3)<=L0,前极点精准线3*1.01,39);};

{H极点精准线:CONST(REF(H,指定点)),COLOR7777FF;
DRAWICON(ABS(H极点精准线-H)<=L0,H极点精准线*1.01,35);
DRAWICON(ABS(H极点精准线-L)<=L0,H极点精准线*0.99,34);}
{极点精准线:CONST(L),COLOR0077FF;
DRAWICON(ABS(L-极点精准线)<=L0,极点精准线*0.99,1);
DRAWICON(ABS(H-极点精准线)<=L0,极点精准线*1.01,2);
同向极点精准数:COUNT(ABS(L-极点精准线)<=L0,60)-1,COLOR0077FF,NODRAW;
异向极点精准数:COUNT(ABS(H-极点精准线)<=L0,60),COLOR0077FF,NODRAW;
XG:=同向极点精准数>0 AND 异向极点精准数>0;}
{DIFF:=10*(EMA(CLOSE,12)-EMA(CLOSE,26));
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
量缩价涨:=CREF(MACD,1) AND C>REF(C,1) AND REF(CO;
阴KDAY:=BARSLAST(量缩价涨)+1;
STICKLINE(V,REF(O,阴KDAY),REF(O,阴KDAY),3.5,0),COLORMAGENTA;
DRAWICON(CROSS(C,REF(O,阴KDAY)),L,1);};

{DRAWTEXT_FIX(ISLASTBAR,0.5,0.05,0,CODE),COLORYELLOW;
DRAWTEXT_FIX(ISLASTBAR,0.55,0.05,0,STKNAME)COLORYELLOW;
DRAWTEXT_FIX(ISLASTBAR,0.6,0.05,0,HYBLOCK),COLORCYAN;
DRAWTEXT_FIX(ISLASTBAR,0.6,0,0,DYBLOCK),COLORCYAN;
DRAWTEXT_FIX(ISLASTBAR,0.55,0.85,0,GNBLOCK),COLORMAGENTA;
DRAWTEXT_FIX(ISLASTBAR,0.55,0.90,0,FGBLOCK),COLORMAGENTA;
DRAWTEXT_FIX(ISLASTBAR,0.55,0.95,0,ZSBLOCK);};

{11、非包含关系的分型端点预选};
分型顶0:=H>REF(H,1) AND L>REF(L,1);
分型底0:=L

{12、包含关系的K线处理：凡不符合上述类型的K线，均处于包含关系之中};
{包含关系分为二种：一、当前K线包含前一根K线时，需进行合并处理；二、当前K线被前一根K线包含时，因不涉及端点，无需处理。};
分型顶1:=(H>=REF(H,1) AND L<=REF(L,1)) AND (BARSLAST(分型顶0)
分型底1:=(H>=REF(H,1) AND L<=REF(L,1)) AND (BARSLAST(分型底0)
{13、将前述二种分型节点作为备选分型。}
分型顶2:=分型顶0 OR 分型顶1;
分型底2:=分型底0 OR 分型底1;
{14、对连续的同向分型节点，取最高点或最低点为本笔分型的节点，并向前过滤掉中间满足条件的分型。};
{注：过滤的目的是仅保留最后一次的最高最低节点分型，确保预选分型节点的唯一性。}
分型顶:=FILTERX(分型顶2 AND H=HHV(H,BARSLAST(分型底2)),BARSLAST(分型底2));
IF(分型顶,H,DRAWNULL),CIRCLEDOT,COLORGREEN,LINETHICK3;
分型底:=FILTERX(分型底2 AND L=LLV(L,BARSLAST(分型顶2)),BARSLAST(分型顶2));
IF(分型底,L,DRAWNULL),CIRCLEDOT,COLORRED,LINETHICK3;
{二、对符合形成笔条件的分型节点进行粗选。}
{注：符合笔条件的分型应符合缠论以下条件：
1、力度：本笔的起点与终点之间，必须存在最高的低点与最低的高点分离（缠论无要求，可删除）
2、包含：无包含关系的K线数量必须达到二根以上，即：右肩+左肩+本笔。
3、数量：本笔所有K线数量，在无包含关系的情况下，除起点K线外，其余数量必须达到三以上，即：右肩+过渡+左肩+本笔。};
{21、以分型顶底为起点形成笔的要求，进行第一次筛选，得到笔的第一类过渡期顶、底。};
{顶力度1:=HHV(L,UP1+1)>LLV(H,UP1+1);}
UP1:=BARSLAST(分型底);
顶包含1:=COUNT(L>REF(L,1) AND H>REF(H,1),UP1)>2;
{底力度1:=HHV(L,DN1+1)>LLV(H,DN1+1);}
DN1:=BARSLAST(分型顶);
底包含1:=COUNT(H2;
笔顶10:=分型顶 AND{ 顶力度1 AND }顶包含1;
笔底10:=分型底 AND{ 底力度1 AND }底包含1;
{211：取同一笔中的最高点或最低点为笔的分型顶、底端};
笔顶1:=笔顶10 AND H=HHV(H,BARSLAST(笔底10));
笔底1:=笔底10 AND L=LLV(L,BARSLAST(笔顶10));
DRAWLINE(笔顶1,H,笔底1,L,0),COLORGREEN,LINETHICK2,NODRAW;

DRAWLINE(笔底1,L,笔顶1,H,0),COLORRED,LINETHICK2,NODRAW;